Braun Hi-Fi set consisting of Braun CSV 250/1 amplifier and CE 500 radio tuner designed by Dieter Rams. Great working condition: Both units are perfectly working and have been restored by our Braun technician (transistor changes) and come in a great outer condition - see images. The (link: https://onlyonce.com/product/acron-300-c-hi-fi-speakers text: Acron speakers) are available separately and not part of the set. Both, Amplifier & Radio units are also available separately - please contact us in this case.
**Technical specifications:** CE 500: Fully transistorized, high-quality tuner for radio reception on the wavebands VHF (stereo), medium and long wave. Version CE 501 K replaces long wave with short wave. Transmitter selection by separate transmitter selection knobs for AM and VHF. VHF module equipped with field effect transistor. Automatic VHF sharp tuning. Stereo display and large tuning meter. Accordance of maximum pointer deflection with ratio zero crossing. Ferrite antenna for MW and LW (KW). THD 0.5% at 1000 Hz with 40 kHz deviation, sensitivity 1 uV for 30 dB signal-to-noise ratio, limiting insert at 1.2 iiV, limiting effective in 5 steps. Selectivity 54 dB for 400 kHz according to IHF, crosstalk attenuation 35 dB at 1000 Hz with 40 kHz deviation.
CSV 250/1: Fully transistorized HiFi stereo amplifier with 2X65 watts of power (2x40 watts sine wave). Toggle switches for band control, rumble filter, noise filter, linear volume control, presence attenuated, mono and stereo operation, side swapping. Separate balance, bass and treble dividers. Mode switching by push buttons. Frequency response 10 ... 35 000 Hz, distortion factor <0.4%, crosstalk attenuation >47dB, impedance > 70 dB. Ironless power amplifiers with electronic fuse. Connections: Radio, phono, tape, microphone, reserve, speaker, headphones. Housing: sheet steel with anthracite gray ruffle varnish. Front panel made of aluminum.
Dimensions: L 26 x W 32 x H 11 cm
Weight: 10 kg
Item No: 30142
Designed by Dieter Rams
Dieter Rams is a German industrial designer born in 1932. His name is closely associated with the consumer products company Braun, the furniture company Vitsœ, and the functionalist school of industrial design. His unobtrusive approach and belief in "Less, but better" design generated a timeless quality in his products and have influenced the design of many products, which also secured Rams worldwide recognition and appreciation. Dieter Rams started his architecture and interior decoration studies in 1947 at the Wiesbaden Art Academy, which is now part of the Rhein Main University of Applied Sciences. A year later, in 1948, he took a break from his studies, gained practical experience and completed his carpentry apprenticeship. He returned to the Wiesbaden Art Academy in 1948 and graduated with honors in 1953, after which he started working for the Frankfurt architect Otto Appel. In 1955, he was hired by Braun as an architect and interior designer. In 1961, he became Braun's design director and served until 1995.